SHAKE WELL BEFORE USING. Do not dilute before applying.
Wear rubber gloves and eye protection during handling and application to prevent skin and eye contact.
Liberally apply an even coat of STONETECH Heavy Duty Coating Stripper over the required area with a paint brush, mop or paint pad. DO NOT APPLY WITH A SPRAYER. Immediately remove STONETECH Heavy Duty Coating Stripper from unintended surfaces with a wet cloth to prevent potential damage to those surfaces.
Application time will vary depending on type of coating being removed. See packaging for details.
Do not let STONETECH Heavy Duty Coating Stripper dry on the surface. If it starts to dry, add additional product to keep surface wet.
Agitate surface with a nylon scrub brush or pad after testing a small area first to make sure that brush or pad will not scratch stone. Surface can be wet with water to enable easier removal of coating.
Wipe up residual STONETECH Heavy Duty Coating Stripper with clean, dry clothes or wet mop. A wet/dry vacuum can be used for larger area.
Rinse surface well with clean water.
More than one application may be required, repeat steps 3 through 8 when necessary.
Surface traffic may begin 2 hours after removal of coating.