STONETECH® Salt Water Resistant Sealer is a penetrating sealer formulated to protect exterior surfaces exposed to de-icing salts from salt degradation.

Uses (Exterior):

  • Salt water pools
  • Floors
  • Walls
  • Walkways


  • High-performance protection against salt water damage and de-icing salts
  • Weather and UV-resistant
  • Water-based formula
  • Exterior use

Recommended Surfaces

Treatment around salt water pools:
  • Natural stone
  • Porous tile
  • Concrete pavers
  • Terra cotta
  • Grout
Protection against de-icing salts:
  • Poured concrete
  • Aggregate
  • Pavers
  • Flagstone


  1. Mask off any surfaces not intended to be treated
  2. Liberally apply an even coat of STONETECH® Salt Water Resistant Sealer with a bristle paint brush or paint roller.
  3. Allow sealer to penetrate the surface for 15-20 minutes. During this time, distribute excess sealer over entire area to ensure even penetration. Do not allow sealer to pool on the surface. DO NOT ALLOW EXCESS SEALER TO DRY ON THE SURFACE.
  4. Thoroughly wipe the entire surface with a clean, dry cloth to completely remove all excess sealer from the surface.
  5. For protection against de-icing salts, a second coat is recommended and should be applied 15-20 minutes after the initial application as directed in steps 2-4.
  6. The sealer should be fully cured prior to water contacting the surface. Full cure is achieved in 72 hours. If there is a possibility of rain within the 72-hour cure time, cover surface so it remains dry.
  7. Clean tools used during application with water.
  8. If resistance to oily stains is also desired, apply STONETECH® BulletProof® Sealer after Salt Water Resistant Sealer has fully cured.
Prices, inventory and promotions may vary by retailer. Please call the store first to check actual availability of this item.