Products

(0)

STONETECH® Impregnator Pro® Sealer is a solvent-based sealer that preserves the natural look of stone surfaces.

Uses (Interior and Exterior):

Countertops
Backsplashes
Floors
Walls

Advantages:

Heavy-duty protection against most stains
Preserves natural look of stone
Solvent-based formula
Internal and exterior use

Recommended Surfaces include natural stone, such as:

Granite
Limestone
Slate
Bluestone
Travertine
Sandstone

Directions

Ensure area is well-ventilated during application and until the surface is dry. Use a respirator if unsure that area is well-ventilated. A NIOSH-approved respirator with a combination HEPA/organic vapor cartridge is recommended. Follow respirator manufacturer's instructions for use.
Mask any surfaces not intended to be treated.
Liberally apply an even coat of STONETECH® Impregnator Pro® Sealer using a paint pad, roller, brush or pump-up garden sprayer. DO NOT USE A POWER SPRAYER. See method of application for more information. Do not thin before using.
Allow sealer to penetrate surface for 15-30 minutes; denser stone may require more time for sealer to penetrate. During this time, distribute excess sealer over entire area to ensure even penetration. DO NOT ALLOW EXCESS STONETECH® Impregnator Pro TO DRY ON SURFACE.
Thoroughly wipe entire surface with dry cloth to remove excess STONETECH® Impregnator Pro® Sealer from surface.
A second coat may be needed for more porous surfaces and should be applied one hour after initial application, as directed in steps 3 through 5.
If excess sealer was not completely wiped off and a residue appears, wipe entire surface with a towel dampened with sealer. Use a white nylon scrubbing pad to loosen residue and follow with white absorbent towel to remove.
Full cure is achieved after 24-72 hours. Surface use may begin in 6-8 hours. If use of the surface must resume sooner, cover the treated surface with red rosin paper to protect it until full cure is achieved.
Rags and equipment that are wet with product may be combustible. Clean up promptly after job is complete. Clean equipment with mineral spirits and allow to dry in a well-ventilated area. Allow rags to dry in a well-ventilated area out of the reach of children and pets. When dry, dispose of in accordance with local waste disposal regulations.

Prices, inventory and promotions may vary by retailer. Please call the store first to check actual availability of this item.