STONETECH® Oil Stain Remover is designed to remove oil-based stains without discoloring the surface.

Uses (Interior and Exterior):

  • Countertops
  • Floors


  • Pulls out deep-set oil stains
  • Leaves no permanent residue
  • Easy to use
  • Will not discolor stone

Recommended Surfaces include natural stone, masonry and cementitious grout, such as:

  • Marble
  • Granite
  • Limestone
  • Travertine
  • Slate
  • Sandstone
  • Concrete
  • Quartzite


  1. Using a plastic or wood spatula, stir thoroughly to mix the paste
  2. Apply a 1/4" (6mm) thick layer of paste to the stain; ensure that the paste extends at least 1-2" (25-50mm) beyond the edge of the stain
  3. Do not cover
  4. Allow 48-72 hours for paste to completely dry
  5. Using a plastic spatula, remove dried product and discard
  6. Allow solvent to completely dry from the stone
  7. If stain is not completely gone after drying, repeat process
  8. Clean up residue and tools with mineral spirits
  9. Once the surface is dry, re-seal the cleaned area with a STONETECH® Sealer, such as STONETECH® BulletProof®
Prices, inventory and promotions may vary by retailer. Please call the store first to check actual availability of this item.